2MP WIFI LOW POWER BATTERY CAMERA
Model: W-C6-WF
Product Features:
The charging camera's outer casing is made of plastic,for indoor use only;
The camera adopts high sensitivity waterproof microphone.
Powered by 12800 mAh lithium polymer battery;Can set incoming alarm recording and all-weather recording;
Ultra-low power consumption, super long time standby, and intelligent power saving function, standby time more than 60 days;
continuous recording for about 18 hours;
Uses 1/3 high-definition photosensitive chip; Picture resolution: 1080p, 2MP;Clear and delicate picture quality , good color reproduction;
With ICR double filter switcher, automatic color turn black, built-in 2Pcs LED low power infrared lamp, can effectively improve the night vision sharpness;
High power Wifi module built into the equipment, external professional customized Wifi antenna, stronger receiving Wifi signal stability, do not drop the line,distance is far, no drop;
Radar function: After setting, the human body is detected, and the camera can immediately push the alarm information to the mobile APP;
Remote wake-up function, PIR alarm push function, mobile phone app response in time, anytime to see;
Built-in pickup, horn, users can monitor through the mobile phone app, and can realize real-time remote video voice intercom;
Using High-performance DSP codec chip, the host can deal with a variety of complex situations, rapid response;
Good experience of low-power equipment dedicated app, simple operation, full-featured, product settings can be set through the mobile phone app;
Supports maximum 64G TF card storage, or select cloud storage to meet different customer requirements. and you can View alarm video on your phone APP;
Product support network recording, after configured Wifi network, such as network interruption, PIR alarm can be normal triggered and recorded, connected to the network, you can read the recording information;
Professional factory production;
Product application range:
This product requires no wiring, is maintenance-free, and is suitable for use in various indoor environments where it is not convenient to get power.
The sensitive PIR human sensor alarm can remotely wake up the device at any time, watch videos, and view videos.
The main parameters:
Operating system: Linux
Image sensor: 1/3 million pixel CMOS
Minimum illumination: Color 0.6 lux@f1.2, black and white 0.08 lux@f1.2,0 Lux ir Open
Day and night mode: Ir-cut Double Filter Automatic switching
Lens: 3.6MM million HD lens
Video compression: H.264, support dual code flow
Video mode: HD/SD
Maximum image size: Main stream 1920x1080; sub-code stream: 640x480;
Resolution: 1080P/ 2MP
Frame rate: 25 Frames
Audio coding: G726, G711, AAC, MP3 format, 8K sampling rate, support echo cancellation function
Audio input: Built-in mic
Audio output: Internal speaker
Real Standby: Built-in MCU, support true standby function, support infrared, key, Gpio alarm wake-up main system; system standby power consumption 60uA
Wireless network: 2.4GHzIEEE 802.11b/g/n
Storage Features: Support Micro SD card storage, Max 64G
Intelligent Alarm: Radar Infrared Sensor alarm, effective distance of 10 meters
Infrared lamp: 2Pcs LED light, wavelength 850nm, effective distance of 10 meters
Battery: 12800 mah polymer lithium battery, charge voltage: 5v2a
Standby time: 60 days
Power: 0.75W (work) 0.0025W (standby)
Working environment: –10°c~60°c/20%~85% (non condensation)